RG59 Siamese Cable 100m
Model: SF-CABLE-SIAMESE
RG59 + 2×18AWG power composite cable, 100m roll for analog/HD-TVI runs.
Cables & Connectors
Model: SF-CABLE-CAT6
305m box of Cat6 UTP for IP camera and PoE network backbone.
💬 WeChat: 13924664587 — add us for fast quotes & product photos.
802.3af/at PoE, RJ45, BNC, DC 12V/24V — works with Hikvision, Dahua, Axis & more.
Covered against manufacturing defects. RMA & replacement via support.
Local / NVR storage by design. No cloud subscription required.
Integrates with standard VMS/NVR ecosystems — no vendor lock-in.
Dispatched globally with regional carriers.
Direct line for quotes, specs and install photos.
| Type | Cat6 UTP, 23 AWG solid copper |
| Length | 305m (1000ft) pull box |
| Speed | 1Gbps @ 100m |
| Jacket | PVC, mark every meter |
| Use | IP cameras / PoE / data |
| Certifications | CE / RoHS / REACH |
| Model | SF-CABLE-CAT6 |
| Brand | SurveilForge (independent) |
A 305-meter pull box of Cat6 UTP cable for IP camera networks and PoE runs. 23 AWG solid bare copper conductors keep resistance low and PoE delivery stable, while the PVC jacket is rated for in-wall and outdoor conduit installations. Supports Gigabit Ethernet to 100 meters and works with all 802.3af/at injectors and switches. Marked every meter for fast measuring on site.
Yes. SurveilForge accessories use open surveillance standards — IEEE 802.3af/at PoE, RJ45, BNC, and DC 12V/24V — so they work with any camera brand that follows those standards, including Hikvision, Dahua, Axis, Reolink and others. We are an independent brand, not affiliated with any camera OEM.
Yes. We ship worldwide; lead time and carrier depend on the destination and order size.
Standard products are available as single units in the shop. OEM or custom-branded orders start at a minimum of 300 pieces.
All products carry a 12-month warranty against manufacturing defects. Contact our support team for RMA and replacement.
Be the first to review this product
Verified buyers help other installers choose the right gear. Share your setup and we'll feature it here.
⏱ Takes about a minute · published within 1–2 business days.
Model: SF-CABLE-SIAMESE
RG59 + 2×18AWG power composite cable, 100m roll for analog/HD-TVI runs.
Model: SF-BNC-10
10 nickel-plated BNC twist-on connectors for coax camera ends.
Model: SF-DC-10
10 pairs of 5.5×2.1mm DC power plugs (male + female) for 12V cameras.
Model: SF-BALUN-PAIR
Passive BNC-to-RJ45 baluns to run analog video over Cat5e/Cat6.
Planning, sizing and install tips that use this product:

Choosing outdoor CCTV cable: when to run RG59 siamese for analog/HD-over-coax and Cat6 for IP PoE cameras, plus run limits and weatherproofing.

BNC coax vs RJ45 network: how analog and IP cameras are wired, when UTP baluns save cable, and which connectors you need.

Warehouse CCTV planning: high-ceiling mounting, long cable runs, wide-angle lenses and a managed PoE switch that powers the whole edge.

Cat5e vs Cat6 for CCTV: both run PoE to 100m, but Cat6 gives headroom for multi-gig and cleaner installs. Here is the call.

Crimp an RJ45 for IP camera cable in 6 steps: strip, arrange T568B, seat, crimp, and test before you mount. Tool list included.

Hikvision-compatible accessories that just work: standards-based PoE switches, cables and mounts at a fraction of OEM cost. See the full brand guide.

Hikvision, Dahua and Axis cameras all speak open PoE, RJ45, BNC and DC standards — so switches, cables, mounts and power are interchangeable. Only brand-locked software and protocols are not.

CCTV cable choice depends on the camera type: Cat6 for IP PoE, RG59 siamese for analog/HD-TVI, and UTP baluns to run analog video over network cable.

Connect an IP camera to an NVR in three physical steps plus an on-screen add. Built-in PoE ports or a separate switch both work via ONVIF.

Apartment CCTV covers every shared point — entrances, lobbies, corridors, bin stores and resident parking — on a PoE edge sized for the building.

Wired wins on reliability and never needs Wi-Fi; wireless wins on no-dig installs. Most sites use both — PoE for the core, wireless for the spots you cannot cable.

New IP installs use Cat6 — one cable does data and power. Keep RG59 only for analog or HD-over-coax cameras you already own.

PoE runs power and data on one Cat6 cable; 12V needs a separate power line. Here is when to choose each.

Cat6 PoE stops at 100m by spec. To go further, break the run with fiber, a second switch, or a wireless bridge.

Plan a temporary construction site camera system that records locally: powered zones on PoE kits, off-grid zones on solar 4G, and a wireless bridge to link trailers.

A warehouse camera plan: count cameras by zone, size the PoE switch and NVR, keep Cat6 under 100 m, and use industrial switches on docks.
Conversations may be saved to improve our support. No personal data required.